luxuriance-tech logo

Water Operation


TT-DW160   Compact Temperature Control Unit—NEW Design
Compact, powerful pressurized water unit for injection moulds


Range of application:
‧    with water up to 160°C

Special features:
‧    Compact and powerful
Lengths: 750 mm x Width: 180 mm x Height: 550 mm, incl. castors
‧    Tough construction

Features included:
‧    Self-optimizing temperature controller with digital display of the set and actual temperature. With high precision regulation in 1/10˚ range. Can be adjusted to read ˚C or ˚F.
‧    Automatic temperature control – difference between set and actual temperature actives an alarm.
‧    Digital flow indication with control of the minimum flow.
‧    Indication of the pressure to the mould.
‧    Pressure discharge, aeration and water filling.
‧    New developed pump with well proved magnetic coupling.
‧    All components in contact with water are made of stainless steel or bronze.
‧    Fast reacting heating system.
‧    High cooling capacity (plate heat exchanger).
‧   
‧   
‧    Safety devices:
      -    Level control for dry run protection.
      -    Electronic temperature limiter in the controller and separate mechanical safety thermostat.
      -    Main switch, transformer and motor protection switch.
      -    Horn as failure indication.
‧    All failures are also indicated visually.
‧    Unit on castors.


TT-170L   Mini Temperature Control Unit
Application: With water up to 90˚C/ mould weight from 1 – 50 kg


Range of application:
‧    Small injection moulding machines
‧    Small rollers, e.g. Ø 80 mm, length 300mm
‧    Application in laboratory
Despite its size this robust built unit is constructed for permanent use under hard conditions without any problem.

Special features:
‧    Small and compact
Lengths: 640 mm x Width: 200 mm x Height: 490 mm, incl. castors
‧    Tough construction
‧    Suitable for placing on a rack with 6 or 8 units

Features included:
‧    Submersible seal-less pump manufactured from bronze.
‧    Self-optimizing temperature controller with digital display of the set and actual temperature. With high precision regulation in 1/10˚ range. Can be adjusted to read ˚C or ˚F.
‧    Automatic or manual water refill.
‧    Lime scale free heat exchanger.
‧    Long life expectancy due to corrosion free unit.
‧    All components in contact with water are made of stain less steel or bronze.
‧    Safety devices:
      -    Level control with two different levels: pre-warning with indication lamp and acoustic alarm; the unit continues to operate. If further liquid is missing, the unit stops.
      -    Separate mechanical safety thermostat and electronic temperature limiter installed in the controller.
      -    Main switch, automatic cutout, transformer and motor protection switch.
‧    All failures are visually indicated.
‧    Castors.


TT-137   Temperature Control Unit

Pressurized water units for temperatures up to 140˚C and 160˚C
Model N   Proven pump system with axial face seal
Model B   Pump with seal less magnetic drive

With electronic flow control

Features included:
‧    Digital flow indication with control of the minimum flow.
‧    Automatic temperature control – difference between set and actual temperature activates an alarm.
‧    Indication of the pressure to the mould and indication of the system pressure.
‧    Self-optimizing temperature controller with digital display of the set and actual temperature. With high precision regulation in 1/10˚ range. Can be adjusted to read ˚C or ˚F.
‧    Reversing switch for temperature controlling at the mould with connection for external thermocouple.
‧    Leakstopper device – unit can be used in pressure or vacuum mode. No water is lost at leaking tools, therefore ensuring continuous production.
‧    Automatic mould drain.
‧    Automatic pressure discharge.
‧    Automatic filling.
‧    Automatic aeration.
‧    Lime scale free heat exchanger.
‧    Standard pump with axial face seal. Optional available: Pump with seal less magnetic drive.
‧    All components in contact with water are made of stain less steel or bronze.
‧    Heating switchable in stages.
‧    Safety devices:
      -    Level control for dry run protection.
      -    Separate mechanical safety thermostat and electronic temperature limiter installed in the controller.
      -    Main switch, automatic cutout, transformer and motor protection switch.
      -    Horn in case of failure. The level pre-warning is indicated with a continuous sound. All other safety information is indicated by an intermittent sound.
‧    Castors.


TT-138   Temperature Control Unit

Pressurized water units for temperatures up to 140˚C and 160˚C
Model N   Proven pump system with axial face seal
Model B   Pump with seal less magnetic drive

With electronic flow control

Features included:
‧    Digital flow indication with control of the minimum flow.
‧    Automatic temperature control – difference between set and actual temperature activates an alarm.
‧    Indication of the pressure to the mould and indication of the system pressure.
‧    Self-optimizing temperature controller with digital display of the set and actual temperature. With high precision regulation in 1/10˚ range. Can be adjusted to read ˚C or ˚F.
‧    Reversing switch for temperature controlling at the mould with connection for external thermocouple.
‧    Leakstopper device – unit can be used in pressure or vacuum mode. No water is lost at leaking tools, therefore ensuring continuous production.
‧    Automatic mould drain.
‧    Automatic pressure discharge.
‧    Automatic filling.
‧    Automatic aeration.
‧    Lime scale free heat exchanger.
‧    Standard pump with axial face seal. Optional available: Pump with seal less magnetic drive.
‧    All components in contact with water are made of stain less steel or bronze.
‧    Heating switchable in stages.
‧    Safety devices:
      -    Level control for dry run protection.
      -    Separate mechanical safety thermostat and electronic temperature limiter installed in the controller.
      -    Main switch, automatic cutout, transformer and motor protection switch.
      -    Horn in case of failure. The level pre-warning is indicated with a continuous sound. All other safety information is indicated by an intermittent sound.
‧    Castors.


TT-142   Temperature Control Unit
Pressurized water units for temperatures up to 140˚C and 160˚C
Model N   Proven pump system with axial face seal
Model B   Pump with seal less magnetic drive

With electronic flow control

Features included:
‧    Digital flow indication with control of the minimum flow.
‧    Automatic temperature control – difference between set and actual temperature activates an alarm.
‧    Indication of the pressure to the mould and indication of the system pressure.
‧    Self-optimizing temperature controller with digital display of the set and actual temperature. With high precision regulation in 1/10˚ range. Can be adjusted to read ˚C or ˚F.
‧    Automatic pressure discharge.
‧    Automatic filling.
‧    Automatic aeration.
‧    Lime scale free heat exchanger.
‧    Standard pump with axial face seal. Optional available: Pump with seal less magnetic drive.
‧    All components in contact with water are made of stain less steel or bronze.
‧    Heating switchable in stages.
‧    Safety devices:
      -    Level control for dry run protection.
      -    Separate mechanical safety thermostat and electronic temperature limiter installed in the controller.
      -    Main switch, automatic cutout, transformer and motor protection switch.
      -    Horn in case of failure. The level pre-warning is indicated with a continuous sound. All other safety information is indicated by an intermittent sound.
‧    Castors.



※There are more models, please e-mail or call us for more information!※